|
Omga Saw; Omga Double Miter Saws Omga TR-2B-NC Double Miter Saw for Cutting Aluminum
Omga TR-2B-NC Double Miter Saw
This 14" Double Mitre Saw is equipped with two heads one fixed on the left and one movable on the right, each having positive mitering stops at +45,-45 and 90 degrees. The machine is controlled by an electro-pneumatic system which enables the operator to select between three automatic working cycles: 1) Simultaneous cycling of both blades, 2)Alternate cycle allowing the machine to cut very short pieces at 45 degrees, 3) Single head cycling. The two standard pneumatic vertical clamps ensure the perfect stability of the workpiece. The unit also comes with standard overload protection on each of the two main motors. A wide variety of optional equipment is available for this system, such as additional vertical or horizontal pneumatic clamps, extended cutting length, brackets for short pieces, air over oil descent of the heads and spray mist system. The versatility of this unit makes it the perfect choice for any precision mitering application.
Technical Data |
Max. distance between saws |
9' 2" |
Min. distance between saws |
12 1/2" |
Min. distance between saws 45 Deg. |
8 3/4" (+ optional) |
Cross cut capacity 90 Deg. |
6 1/2" |
Cross cut capacity 45 Deg. |
5 1/2" |
Max. Depth of Cut | 4 1/4" |
Motor Power HP |
2 x 3 HP |
Max. Beveled Cross Cut |
N/A |
Saw Bore |
1" |
Saw Diameter |
14" |
Arbor Speed RPM |
3200 |
Dust Chute |
3 1/8" |
Crated Dimensions |
150" X 39" X 53" |
Approx. Shipping Weight Lbs. |
1,485 |
Manufacturer |
Machine Type |
Stock Number |
Manufacturer List Price |
OMGA Saws |
Aluminum Saw |
0000166 |
$32,653.00 |
|